Búsqueda

This quick and simple CO2 unit is a standalone system designed for indoor or outdoor use and is the perfect solution to the increasing demand for future proof refrigeration technology. This system is designed for operation with the natural refrigerant CO2 therefore complying with regulations that require systems with GWP less than 150. The unit is designed for easy installation or conversion, indoors or outdoors. All components are integrated into a single cabinet with advanced electronic controls that integrate with most monitoring systems. …

The leading technology in the global change to natural refrigerants is the CO2 transcritical booster system, with many sizing options and efficiency technologies like ETE, there is a solution for any retailer. Epta’s Full Transcritical Efficiency system FTE provides high energy efficiency in transcritical refrigeration systems with medium and low temperature applications. With only standard components, it allows an increase of the evaporation temperature and an elimination of superheat in the medium temperature loads. Epta high pressure parallel compression ETE provides high reliability for transcritical systems in hot ambient conditions with no limit in external temperatures. It includes a subcooling unit in the refrigeration circuit and no additional systems like water spray, external subcooling or adiabatic gas coolers are needed. …

The article highlights the success story of the City of Halton Hills in Ontario, where they have effectively capitalized on net-zero funding to reduce arena costs through the implementation of ammonia heat pumps. By leveraging these innovative heat pump systems, the city has achieved significant cost savings which will shave an estimated 300,000kWh/year off the Town’s electricity bill while promoting environmental sustainability. The article emphasizes how this project aligns with the city's commitment to reducing greenhouse gas emissions and achieving net-zero targets. The use of ammonia as a refrigerant in the heat pumps ensures high energy efficiency and minimizes environmental impact. The City of Halton Hills serves as an inspiring example of how smart investments in sustainable technologies can lead to substantial cost reductions and pave the way towards a greener future. …

The outdated R22 refrigeration system has undergone a comprehensive transformation, where it has been replaced with a high-performance packaged 190 TR (668 kW) transcritical CO2 system, accompanied by a gas cooler. This advanced solution harnesses the advantageous refrigerant properties of CO2 to their fullest extent, optimizing energy efficiency and environmental sustainability. Additionally, the system incorporates heat recovery technology, catering to underfloor heating and snow melt requirements, further enhancing energy savings. The meticulous installation process was successfully concluded in August 2022. Our application proudly presents the remarkable benefits of CO2 refrigeration, including substantial cost reductions, an impressive 40% decrease in water consumption, and an outstanding 50% reduction in energy expenses. …

Thenewest #Refra walk-in container project! 🆕 This dual-purpose #R290 system is ready to serve the headquarters of an international engineering and technology company in Germany 🏬 Two combined walk-in containers each have the #cooling capacity of 1386 kW reaching the overall system power of 2 772 kW! ⚡️ Pretty impressive, isn't it? 😏 That's not all - the total heating capacity of this system is 3 286 kW 💥 👉 This powerful system will be used to air-condition the office building via cooling ceilings in the summertime and to heat the premises using the exhaust air from the ventilation system in the wintertime ♻️ Such and many more unique solutions can be implemented by Refra if you reach out to our sales team here 📲 https://bit.ly/refracontacts …

We would like to present you with one of those projects, where the client approached us with non-standard requirements and we, using our production experience, produced this hybrid! 👀 The pictures show our staple Galaxy frame, housing a combination of MT Air-cooled #Chiller with #R1270 refrigerant and LT subcritical #CO2 Cascade unit 🌱 An additional buffer tank with an integrated #HeatRecovery option is installed on the same frame 💧🔥 This project is one-of-a-kind, but surely not the only one that we've done 😎 If you also have extraordinary projects, just contact our sales team here 👉 https://bit.ly/refracontacts …

PROHeat2o exemplifies best practices in heat recovery with its 2-step Heat Recovery Process, making use of waste heat for a variety of applications. The system is factory-installed within the standard chiller housing and is available on ALL PROChiller System models. In Step 1, waste heat from the refrigerant is harvested through a brazed stainless steel heat exchanger refrigerant-to-glycol water “recovery” loop. The closed “recovery” loop temperature closely follows the discharge refrigerant temperature. In Step 2, a second fluid-to-fluid heat exchanger is then utilized to pre-heat potable water for the customer. The pre-heated water feeds into the customer’s traditional water heating equipment, reducing (or even eliminating) their fossil fuel heating needs. This process allows for multiple benefits versus a single-step heat recovery system: • Lowered Energy Consumption: By utilizing otherwise wasted energy, PROHeat2o minimizes the consumption of electricity, propane, or natural gas for heating water, resulting in reduced energy bills and a smaller carbon footprint. Additionally, the system's dual fluid pumps can be turned on or off based on hot water demand, which adds to operating cost savings. • System Protection: By separating the Refrigerant from the potable water supply, PROHeat2o safeguards both the refrigeration system and the potable water supply, preventing potential damage or contamination. • Cost-Effective Maintenance: Expensive refrigeration repairs caused by low water quality are eliminated by the fluid-to-fluid heat exchanger for potable water heating. When heat exchanger fouling occurs, the low cost fluid to fluid heat exchanger is easily cleaned, or replaced, without extended downtime or high service costs. …

Utilizing carbon dioxide (CO2 or R744) as a refrigerant offers numerous environmental benefits, such as low global warming potential (GWP) and zero ozone depletion potential, as well as long-term financial benefits to the user. Continuous improvement and staying up to date with industry advancements are key to optimizing the use of CO2, and the PRO Refrigeration team does exactly that with their PROGreen Solutions team. • Environmental Impact: CO2 (R744) has a Global Warming Potential (GWP) rating of 1, meaning it has no impact on global warming. In comparison, PRO's other equipment uses the refrigerant R404A with a GWP of 3,900. By adopting CO2 refrigerant, PRO significantly reduces carbon emissions and contributes to environmental sustainability. • Energy Efficiency: CO2 systems can operate above the trans critical point, allowing for increased heat recovery of more than 100%. By generating hot water even during low cooling load and low ambient periods, CO2 system users can eliminate the need for fossil fuel heating sources while shrinking their carbon footprint. • Cost Efficiency: CO2 refrigerant costs are currently 95% lower per pound than common chemical-based refrigerants. Utilizing CO2 recovered from the atmosphere, PRO is eliminating the need for expensive synthetic refrigerants that all have a future phase-out date. …

Subsequent to a request from the Air Conditioning and Refrigeration Industry Association (ARIA) for the certification of technicians in order to have better regulation of the Refrigeration and Air Conditioning Sector, the National Ozone Unit (NOU) approached the National Training Agency (NTA) on possible collaboration in establishing such a system based on the National Guidelines Document developed by the NOU. The NTA indicated that it would include this Professional Certification in its work programme, and a team was established between NTA, the NOU and key stakeholders in the sector, including the School of Refrigeration and Air Conditioning (SORAC), Metal Industries Company Limited (MIC), National Energy Skills Center (NESC), and the Youth Training and Employment Partnership Programme (YTEPP), to develop this Professional Certification. Consultations were held in Trinidad and Tobago and the proposal revised accordingly. The System was been finalized based on input from all stakeholders and is now being administered by MIC. The Certification System is also a component of this country's Hydrochlorofluorocarbon (HCFC) Phase out Management Plan, implementation of which is conducted by the National Ozone Unit and facilitated by the United Nations Development Programme …